Fast Spectral Loss Measurement Application
3
The configuration wizard can be launched from the File menu as well.
If an agconfig file with identical hardware settings is loaded from within
NOTE
an activated engine, only the changed measurement parameters will be
applied to the current engine. You can use this to quickly switch between
different parameter sets.
If an agconfig file with different hardware settings is loaded instead, the
current engine will be deactivated and the chosen agconfig file will be
used to activate a new engine.
Measurement Setup
The general setup is illustrated in the following diagram:
Keysight N7700 Photonic Application Suite, Fast Spectral Loss Engine, User's Guide
49