Omron K6CM Startup Manual page 8

Enter the following command and press Enter to execute. In the command, "D:" is the drive to which the OS
media checked earlier was assigned. Depending on the user environment used.
As you can see, be sure to modify the command according to the drive information you have confirmed.
Command :
Dism /Online /Enable-Feature /FeatureName:NetFX3 /All/Source:D:¥Sources¥SxS /LimitAccess
* Enter the command on one line without line break. Insert a space between Dism and the set of words (/ ***) that
compose the command.
Wait for a while until the completion screen as shown below. If this screen can be confirmed, the installation of
.NET Framework 3.5 will be completed, continue installing the Motor condition monitoring Tool.
(2) Select "Programs" from the Control Panel.
(3) Select "Turn Windows features on or off".
8