Omron K6CM Startup Manual page 3

1
Step Confirmation of details
□ K6CM unit
□ LAN port cover
□ Tool (Motor condition monitoring
Tool) CD-ROM
2
Step
Preparation of necessary items
□ PC
(Requires CD-ROM drive, LAN port)*
□ LAN cable
(Category 5 or above, straight type or
cross type acceptable)
□ DIN rail or M3 screws
□ Push-in Plus Terminal Block wiring
* Prepare a PC that meets the following conditions.
Item
OS
CPU
Memory
Disk reserved area capacity
Monitor resolution
.NET Framework
Others
1
1
1
Windows 7, Windows 8.1, Windows 10 (32 bit/64 bit) (JP/EN)
1 GHz or more, 32 bit or 64 bit processor
1 GB or more, or 2 GB or more (in the case of 64 bits)
16 GB or more, or 20 GB or more (in the case of 64 bits)
1024 × 768 (XGA), High Color 16 bit or more
.NET Framework 4 and .NET Framework 3.5 SP1
CD-ROM drive: For installation
LAN port: For network connection
□ Operation Manual
(JP/EN, A4 size)
□ IP address label
(for IP address input)
□ Push-in Plus Terminal Blocks
erroneous insertion prevention
label
□ Unit power supply 100 VAC to 240 VAC or
24 VAC/DC
□ Startup Guide (This Document) 1
Description
1
1
1
Motor Condition
Monitoring Device
K6CM
Startup Guide 0
Step Selection of sensor to use
Step 1 Confirmation of details
2 Preparation of necessary
Step items
Motor condition monitoring
3
Step Tool installation
4 K6CM configuration in the Motor
Step condition monitoring Tool
5
Step Installation
6 Connection
Step
Step 7 Monitoring
3