Omron K6CM Startup Manual page 4

3
Step
Installation of Motor condition monitoring Tool
1 Installing .NET Framework 3.5 SP1
The Motor condition monitoring Tool requires Microsoft .NET Framework 3.5 SP1 to run the program.
If .NET Framework 3.5 SP1 is not installed on your PC, install it manually.
It is installed as a standard on Windows 7 PC. Follow steps (2) to (4) below.
It is not installed as a standard on Windows 8.1 and Windows 10 PC.
When using on a PC with Windows 8.1 or Windows 10, perform the steps (2) to (4) after installing
the .NET Framework 3.5 SP1 shown in the following step (1).
(1) Install .NET Framework 3.5 SP1.
● Installing by connecting the PC to the network
[1] Install by "dotnetfx35.exe" in the Framework folder on the CD.
[2] If you use Japanese 32bitOS, install language pack by "dotnetfx35langpack _ x86ja.exe" in Framework folder on CD.
If you use Japanese 64bit OS, install language pack by "dotnetfx35langpack _ x64ja.exe" in Framework folder on CD.
● Installing without connecting the PC to the network
This procedure shows how to install the Motor condition monitoring Tool (and attached software) on PCs (Windows
8.1 or Windows 10 OS) that cannot connect to the network.
What are required to prepare :
• Network connected PC
• Empty recording medium (USB memory of 8GB or more, HDD or DVD)
This procedure also details the resolution technique published on the following Microsoft official website.
Microsoft official website URL :
https://msdn.microsoft.com/ja-jp/library/windows/hardware/dn898529(v=vs.85).aspx#nointerent
* In Windows version 8.1 or later OS version, the "Microsoft .NET Framework 3.5" required for installing the above
mentioned attached software is not installed in advance. Therefore, if you are using a PC with the above OS ver-
sion and cannot connect to the network, you cannot acquire the above. NET and you cannot install the software
included with the Motor condition monitoring Tool.
[1] Acquire OS media creation tool
To create the OS media that matches the Windows version of the PC you want to install the Motor condition
monitoring Tool, download the OS media creation tool "MediaCreationTool.exe" from the official Microsoft page at
the following URL.
Windows 8.1 https://www.microsoft.com/en-us/software-download/windows8
Windows 10
* If you do not know the Windows version of your PC, perform the following procedure.
1) Hold down the Windows key and press the R key.
Alternatively, click [Run] from the [Start] menu.
4
Outline of this procedure
Network
[1] Obtaining OS
media creation
PC
[2] Preparation of OS media
USB memory, HDD
https://www.microsoft.com/en-us/software-download/windows10
(Install Motor condition monitoring Tool after [3])
PC
K6CM
Win 8.1/10
[3] . NET Framework 3.5
Offline installation
Or DVD