Ir Remote - Event Lighting PAR19X12L User Manual

www.event-lighting.com.au

IR Remote

In order to use the IR Remote, PAR19X12L must be in DMX mode
without an active DMX connection. If a DMX signal is received,
PAR19X12L will prioritise the DMX signal and ignore the IR Remote.
Use On/Off to turn PAR19X12L on or off. The current IR settings will be
saved automatically when PAR19X12L is powered off and reloaded when
it is turned on again. To reset to the factory default Blackout mode, long
press Off.
Press R/G/B/W/A/U to light up the LEDs in red, green, blue, white, amber
or UV respectively. Press a number 0-9 in the orange shaded area to
select a pre-set colour.
Press + to increase the intensity of the selected colour and - to decrease
the intensity of the selected colour.
Press Auto/Sound/Strobe to switch on or off Auto mode, Sound Active mode and Strobe mode,
respectively.
Press Blackout to clear all the remote settings and blackout PAR19X12L.
6