Table of Contents
Advertisement
Accessories
Product Description
The Ventrac SS575 salt spreader is designed to spread bagged rock salt*, bagged ice melt products, cal-
cium flake, or calcium pellets. An optional vibrator kit also allows the spreader to use bulk salt. The SS575
salt spreader features a 5.75 cubic foot (.163 cubic meter) volume capacity and 460 pound (209 kilogram)
weight capacity. An electronic control box comes standard and features a variable electronic speed control
and On/Off switch. The SS575 salt spreader is for use on 4000 series Ventrac power units only.
*Optional vibrator kit (70.8120) may be needed, depending on the properties and condition of the rock salt.
An optional drop curtain kit is available for spreading materials in tight quarters such as sidewalks, cart
paths, and more.
Why Do I Need an Operator's Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely
operate, maintain, and service your machine. It is divided into sections for convenient reference of the
appropriate section.
You must read and understand the operator's manual for each piece of Ventrac equipment you own. Read-
ing the operator's manual will help you become familiar with each specific piece of equipment. Under-
standing the operator's manual will help you, as well as others, avoid personal injury and/or damage to the
equipment. Keep this manual with the machine at all times. The manual should remain with the machine
even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-
tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both
the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine
while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual
may result in personal injury and/or damage to the equipment.
INTRODUCTION
V
enture Products Inc. is pleased to provide you with your new
Ventrac salt spreader! We hope that Ventrac equipment will
provide you with a ONE Tractor Solution.
Listed below are just some of the items that can provide you
versatility as you use your SS575 salt spreader. Please visit
our web site, or contact your authorized Ventrac dealer for a
complete list of items available for your new salt spreader.
Item Description
4100/4200 Spreader Install Kit
4500 Spreader Install Kit
Drop Curtain Kit
Vibrator Kit
Introduction - 4
ber
Part Num
70.8113
70.8129
70.8131
70.8120
Advertisement
Table of Contents
