Table of Contents
Advertisement
•
Spreader must be pinned and locked into position before operating power unit and spreader.
•
Never exceed the recommendations in the weight capacity charts in the operation section, which speci-
fies the material weight that can be used with different attachments. Exceeding the weight recommen-
dation for your front attachment may result in loss of steering or front wheel traction.
•
Do not operate power unit with SS575 spreader on slopes greater than 10 degrees. Operation on
slopes greater than 10 degrees may result in loss of steering or front wheel traction.
•
Never attempt to remove a spreader from the power unit while there is material in the spreader hopper.
•
Always make sure personnel are clear of areas of danger when using equipment. Maintain 60' distance
from all bystanders when operating the spreader.
•
Never use with foreign debris in the spreader. The spreader is designed to handle only clean, free-flow-
ing material.
•
Before working with the spreader, secure all loose fitting clothing and unrestrained hair.
•
Always wear safety glasses with side shields when servicing spreader.
•
Read lead labels before attaching wire harness to power source or ground.
•
Do not splice any other device into the wire harness.
SAFETY
SS575 Safety Procedures
Safety - 12
Advertisement
Table of Contents
