Set Pdo Access - ADF Web AXIS HD67804-KNX-B2 User Manual

Industrial Electronic Devices

SET PDO ACCESS:

By pressing the "Set PDO Access" button from the main window for SW67804 (Fig. 2) the window "Set PDO Access" appears (Fig. 7a and
7b).
This window is made to create the Receive and the Transmit PDO in the CANopen side, and to indicate which bytes are associated to these
PDO.
It is divided in two parts, the " Receive PDO" and the " Transmit PDO ". The first part is used to receive PDO in the CANopen network and
copy the data in the KNX array. The second part is used to transmit PDO in the CANopen network with the data of KNX array.
The data of the columns in the "Receive PDO" have the
following meanings:
In the Field "Cob-ID" the address for the PDO is
defined;
In the Field "Dimension" the dimension of the
PDO is defined (it can be between 1 and 8);
In the Field "Add B1" the first byte where the
data will be saved in the KNX array is defined;
In the Field "Add B2" the second byte where the
data will be saved in the KNX array is defined
(only if Dimension > 1);
In the Field "Add B3" the third byte where the
data will be saved in the KNX array is defined
(only if Dimension > 2);
In the Field "Add B4" the fourth byte where the data will be saved in the KNX array is defined (only if
In the Field "Add B5" the fifth byte where the data will be saved in the KNX array is defined (only if
In the Field "Add B6" the sixth byte where the data will be saved in the KNX array is defined (only if
In the Field "Add B7" the seventh byte where the data will be saved in the KNX array is defined (only if
In the Field "Add B8" the eighth byte where the data will be saved in the KNX array is defined (only if
The field "TimeOut" is used for put at zero the data into KNX if the PDO doesn't arrive with a frequency less than the time expressed
in the field. If the value in the field is 0, means that you don't want to use this feature, and so the value is never deleted;
In the field "Mnemonic" the description for the PDO is defined.
It is possible to configure a maximum of 30 Receive PDO in the "Set PDO Access – Receive PDO"
ADFweb.com Srl – IT31010 – Mareno – Treviso
Document code: MN67804_ENG
Figure 7a: "Set PDO Access – Receive PDO" window
INFO:
User Manual CANopen / KNX
Revision 1.001
Dimension > 3);
Dimension > 4);
Dimension > 5);
Dimension
Dimension > 7);
www.adfweb.com Phone +39.0438.30.91.31
Pagina 22 di 29
> 6);