Table of Contents
Advertisement
Industrial Electronic Devices
CHARACTERISTICS:
The HD67804 is a CANopen / KNX Converter.
It has the following characteristics:
Up to 1440 bytes in reading and 1440 bytes in writing;
Triple isolation between KNX - Power Supply, KNX – CANopen, Power Supply - CANopen.
Two-directional information between KNX bus and CANopen bus;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8...24V AC or 12...35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67804 software on your PC in order to perform the following:
Define the parameter of CANopen line;
Define the parameter of KNX line;
Define the KNX messages that the Converter can accept;
Define the KNX frames that the Converter sends trough the KNX line;
Define the map of KNX byte that must be written in the CANopen side;
Define the map of which CANopen data must be written in KNX messages;
Update the device.
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual CANopen / KNX
Document code: MN67804_ENG
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Revision 1.001
Pagina 6 di 29
Advertisement
Table of Contents
