Ethercat Set Access - ADF Web HD67E67-A1 User Manual

Ethercat master / mqtt - converter

Hide thumbs Also See for HD67E67-A1:

Table of Contents

Industrial Electronic Devices

ETHERCAT SET ACCESS:

By Pressing the

"EtherCAT Set

(Fig. 4). This section is used to define the list of the EtherCAT slave devices to connect and the parameters to read/write.

Figure 4a: "EtherCAT Master Access" window

Below the

"EtherCAT Master Devices

the standard ESI file provided by the manufacturer of the device. For each node, it is necessary to indicate the

related column. If a slave device has more device instances, it is possible to select them using

Note: The EtherCAT devices must be listed with the correct order, respecting the order of the

physical connection to have a correct communication.

ADFweb.com S.r.l.

Access" button from the main window for SW67E67 (Fig. 2) the window "EtherCAT Master Access" appears

List", the list of the EtherCAT devices to connect is defined. It is possible to import the slaves using

User Manual EtherCAT Master / MQTT

Document code: MN67E67_ENG

Revision 1.000

"Slots

Config" button.

Page 21 of 31

"Node

Address" into the

Table of Contents

Do you have a question about the HD67E67-A1 and is the answer not in the manual?