ADF Web AXIS HD67804-KNX-B2 User Manual page 18

Industrial Electronic Devices
In the field "Poll Time" the delay in ms between two KNX commands is defined (if "On Timer" is checked);
In the field "Position" insert the address of the internal array where placing the information;
In the field "Bit Mode" insert the start bit of the first byte of the field "Position" where start to insert the data read;
In the field "Lenght" the dimension of the KNX message is defined;
In the field "Mnemonic" the description for the request is defined.
Note:
If the field "On change" is checked and the "Poll Time" is different from 0, the converter sends the KNX command cyclically and also
when the data is changed.
Note:
If the field "OnCMD", "OnChange" and "OnTimer" are not checked, the converter only sniffs the bus in order to monitor the status of
the KNX message.
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual CANopen / KNX
Document code: MN67804_ENG
INFO: www.adfweb.com Phone +39.0438.30.91.31
Revision 1.001 Pagina 18 di 29