User Manual CANopen / KNX
Document code: MN67804_ENG
Revision 1.001
Pagina 13 di 29
Industrial Electronic Devices
USE OF COMPOSITOR SW67804:
To configure the Converter, use the available software that runs with Windows called SW67804. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8; 32/64bit).
When launching the SW67804, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67804
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO:
www.adfweb.com
Phone +39.0438.30.91.31