Meridian External Alerter And Recording Interface (Meari) - Nortel Meridian M3900 Reference Manual

80 Installation

Meridian External Alerter and Recording Interface (MEARI)

Install the MEARI in the small dock of a M3902, M3903, M3904, or
M3905 set. There are three output connectors on the back of the
MEARI cartridge. There is no need to disconnect the power supply from
the telephone prior to insertion or extraction of the MEARI cartridge.
Figure 12 shows the MEARI output connectors.
Figure 12
MEARI output connectors
2.5 mm jack
Call status
Procedure 12 describes how to install the MEARI.
Procedure 12
Install the MEARI
1
Table 18
RJ12 connections
Position
3, 4 center pair
2, 5 2nd pair
1, 6 3rd pair
Note: Wiring connected to the MEARI must not go outside a building for safety purposes.
555-4001-136 Standard 05.06 May 2002
Release Latch
3.5 mm jack
Record audio
(mic level)
relay
The RJ12 modular connector provides access to all three output signals and
is intended for wiring connection to remotely located equipment (not on the
desktop). Table 18 shows the connections.
RJ12 jack
Call Status relay
Record audio (line level)
Ring relay
Wire color
Green, Red
Black, Yellow
White, Blue
G100093
Function
Call status relay contact.
Record audio (line level).
Ring relay contact