86 Installation
Figure 18
Expansion KBA Footstand
Expansion KBA Plate
4
5
6
Configure the Meridian SL-100 for the KBA
Table 19 shows an example of the SERVORD commands you use to
configure the Meridian SL-100 for the KBA.
Table 19
SERVORD configuration for the KBA
Prompt
ADO
Line
OPTKEY
OPTION
555-4001-136 Standard 05.06 May 2002
Tighten all four screws, ensuring that the two footstand assemblies are
properly aligned.
Insert the clips on the telephone and the Key-based Expansion Modules into
the hinges on the combined Single/Expansion KBA Footstand Assembly, and
while squeezing the Module Tilt Handles, swing the footstand into the desired
position.
Turn the completed assembly upright.
This procedure is now complete
Response
...
x..x
1
KBA
Expansion KBA
Footstand Assembly
Description
...
x..x = Line or DN number.
Option Key.
Key-based Expansion Module Accessory.
Single KBA
Footstand Assembly
G100095