Nortel Meridian M3900 Reference Manual page 62

62 M3905 ACD telephone
Table 13
M3905 keys
Key Description
Goodbye key Use the Goodbye key to terminate an active call.
Hold key A user can place an active call on hold by pressing the Hold key. The feature key
label of the held line displays an icon that shows that the call is on hold. A user can
return to the call that is on hold by pressing the Line key for which the call is on hold.
Mute key and Press the Mute key to mute the voice transmit path. While in handsfree mode, the
indicator microphone is muted. When in mute mode, the mute indicator flashes. To turn the
voice transmit path on again, press the Mute key a second time.
Headset with This key activates the set for headset use. The LED alerts the user that the set is in
LED key headset mode.
Quit key The quit key is used for applications and features.
Dir/Log key The following directories are optionally password protected. The directories
accessible by this key are:
•
•
•
Copy key The Copy key is used for applications and features.
Call These keys are permanently labeled as such, but are not restricted to these
Supervisor, features. The following list maps key numbers to features:
Emergency,
•
Not Ready,
Make Busy, •
and Incalls
•
keys
•
The Incalls key is paired with key 1.
Optional key Optional key caps available with the M3905 set can be configured as follows:
caps
•
•
•
•
•
•
Message key Key 17 is called the Message key, but it is not restricted to that feature. This key
appears with the context-sensitive softkeys. In order to access voice mail without a
message waiting, Nortel Networks recommends assigning Message to Key 1 and
Autodial to the message key (Key 17.) The Autodial key should be programmed with
the voice mail system DN.
555-4001-136 Standard 05.06 May 2002
personal directory with a maximum of 100 entries
call log with a maximum of 100
redial list with a maximum of 20 entries
Key 9 – Make Busy
Key 10 – Not Ready
Key 11 – Emergency
Key 12 – Supervisor Call
Call Agent
Observe Agent
Answer Emergency
Answer Agent
Activity (for LOB codes)
Display Queue (for MSQS or display queue status)