Roles And Permissions Panel - Extron electronics DTP2 R 212 Series User Manual

Roles and Permissions Panel

The Roles and Permissions panel (see figure 43) displays whether Admin and User
passwords have been set. It does not display the actual password.
NOTES: The following rules apply to passwords:
• Length is up to 128 characters.
• All human‑readable characters are permitted except |.
The password cannot be a single space.
•
• Passwords are case‑sensitive.
A user password cannot be assigned if no administrator password exists.
•
• If the Admin password is cleared, the user password is cleared as well.
• The factory configured passwords for all accounts on this device have been set to
the device serial number. In the event of a complete system reset, the passwords
convert to the default, which is extron.
To assign administrator and user passwords:
1. In the Roles and Permissions panel,
click EDIT (see figure 43). The Role
and Permission Settings dialog box
opens.
In the Admin panel, click the Change
2.
Admin Password link and enter the
new administrator password in the field
below (see figure 44).
3. Click in the Confirm Admin Password
field and enter the password from the
Change Admin Password field.
4. To assign a user password, repeat
steps 2 and 3 in the User panel.
5. When finished, click SAVE to
set the passwords. To close
the window without saving a
password, click CANCEL or the X in
the upper‑right corner.
To remove an assigned password:
1. In the Change Admin Password or
Change User Password field, enter
a single space.
2. Enter a single space in the
appropriate Confirm Password
field.
3. Click SAVE.
Figure 43. Roles and Permissions Panel
Figure 44. Passwords Dialog Box
DTP2 R 212 Series • Internal Web Page 57