Table of Contents
Advertisement
12.
Click Open or double‑click on the firmware file.
Click Update on the Update Firmware dialog box. This uploads and verifies the new
13.
firmware onto your connected device. The Installing Firmware progress field shows
the progress of the upload. After the upload is complete, a dialog box opens confirming
that the upload is complete.
14.
Click Close. The software returns to the Device Discovery window.
Select your device from the Device Discovery menu in PCS. A connection must be
15.
re‑established with the device before continuing to use the software.
16.
Click Connect, or double‑click on the device. The device reconnects to the software.
NOTE: The original factory‑installed firmware is permanently available on the
DTP2 R 212. If the attempted firmware upload fails for any reason, the receiver
reverts to the factory version.
DTP2 R 212 Series • Configuration Software
34
Advertisement
Table of Contents
