Extron electronics DTP2 R 212 Series User Manual page 48

X5%
= Rear panel volume control switch status
0 = 10K potentiometer
1 = RS‑232/SIS
X6)
= Input number (1‑max HDMI inputs)
X6!
= Output number (1‑max HDMI outputs)
X6$
= Input insertion port:
0 = Connected to local DTP RS‑232 (Input) (default)
1 = Connected to Ethernet port
2 = Host Mode (RS‑232 control from Tx)
X6%
= Output insertion port
0 = Disabled (Default)
1 = Connected to Ethernet port
X6&
= Port number
01 = Remote RS‑232 port ‑ (SIS ‑ Host Control)
02 = Unused
03–04 = UART's 3 (display control port [port 2001]) and 4 (Over DTP port [port
2002])
X6*
= Baud rate 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600
(default), 14400, 19200, 28800, 38400, 57600, 115200;
Port 1 is fixed at 9600.
X6(
= Parity odd, Even, None, Mark, Space (Only the first letter is required) – default =
None.
X7)
= Data bits 7–8 (8 = default).
X7!
= Stop bits 1,2 (1 = default)
X7@
= Port timeout intervals: 1 (= 10 seconds) – 65000 (default is 30 = 300 seconds = 5
minutes, in 10‑sec. increments).
X7#
= Start point for UART ports, default is 1999 (Rear panel RS‑232 host port = 1999;
2001= Display Control RS232 port; 2002 = Over DTP port) Available port range is
1024‑65534).
Ports are disabled by setting to 0 (if applicable). Attempting to remap a port to a
number already used by another service returns E13.
X7%
= Set Date/Time: (
MM/DD/YY-HH:MM:SS
X7^
= IP Address (xxx.xxx.xxx.xxx) Leading zeros in each of the 4 fields are optional in
setting values and are expressed in returned values. Factory Default IP adress:
192.168.254.254
Default Gateway IP address: 0.0.0.0
Default DNS Server UP address: 0.0.0.0.
X7&
= Hardware ( MAC) address (00-05-A6-##-##-##)
X7*
= Subnet mask (xxx.xxx.xxx.xxx) Leading zeros in each of the 4 fields are optional in
setting values and are expressed in returned values.
Default subnet mask = 255.255.0.0
X7(
= Prefix (subnet mask bits). Subnet 255.255.0.0 is represented as a Prefix value by
/16. Default subnet mask bits response for esc CISG command = /16.
2001
2002
) Example: 06/21/20-10:54:00).
DTP2 R 212 Series • SIS Commands 40