Emergency Stop Button; Protective Cover; Lathe Chuck Key - Jet BD-11G Operating Manual

Stop the lathe immediately if there is a failure in the safety device or if it is not functioning for any
reason.
It is your responsibility!
If a safety device has been activated or has failed, the lathe must only be used when
Ь the cause of the failure has been removed,
Ь it has been verified that there is no resulting danger for personnel or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other personnel working with the machine. The possible consequences are
Ь damage as a result of components or parts of components flying off at high speed,
Ь contact with rotating parts,
Ь fatal electrocution.
The lathe includes the following safety devices:
Ь Self-latching, lockable EMERGENCY STOP button
Ь Screwed-down protective cover on the headstock
Ь Special key for the lathe chuck

1.6.1 EMERGENCY STOP button

1.6.2 Protective cover

The headstock of the lathe is fitted with a screwed-down protective cover.
WARNING!
Remove the protective cover only after the mains plug of the lathe has been pulled.

1.6.3 Lathe chuck key

The lathe is equipped with a special key for chucks. Once the lathe chuck key has been released, it is pushed out
of the lathe chuck by a spring.
11