Qualification Of Personnel; Target Group - Jet BD-11G Operating Manual

If the lathe is used and maintained by personnel who are not duly qualified, there may be a risk
resulting from incorrect operation or unsuitable maintenance.
INFORMATION
All personnel involved in assembly, commissioning, operation and maintenance must
be duly qualified,
follow this operating manual.
Disconnect the machine whenever cleaning or maintenance work is being carried out.
WARNING!
THE LATHE MAY ONLY BE USED WITH THE SAFETY DEVICES ACTIVATED.
Disconnect the lathe whenever you detect a failure in the safety devices or when they are
not fitted!
All additional installations carried out by the operator must incorporate the prescribed safety devices.
As the machine operator, this will be your responsibility!
"Safety devices" on page 11

1.4 Qualification of personnel

1.4.1 Target group

This manual is addressed to
operators,
users,
maintenance stuff.
The warning notes therefore refer to both operation and maintenance of the machine.
Determine clearly and unequivocally who will be responsible for the different activities on the
machine (use, maintenance and repair).
Vague or unclear assignment of responsibilities constitutes a safety hazard!
Always disconnect the machine plug from the mains. This will prevent it being used by
unauthor- ised personnel.
INFORMATION
All personnel involved in assembly, commissioning, operation and maintenance must
Be duly qualified
follow this operating manual.
9