Authorised Personnel; Obligations Of The Operator; Obligations Of The User; Additional Qualification Requirements - Jet BD-11G Operating Manual

Hide thumbs Also See for BD-11G:

Table of Contents

In the event of improper use

there may be a risk to personnel,

there may be a risk to the machine and other material property,

correct functioning of the lathe may be affected.

1.4.2 Authorised personnel

WARNING!

Incorrect use and maintenance of the machine constitutes a danger for personnel, objects and

the environment.

Only authorised personnel may operate the machine!

The only personnel authorised to use this machine and perform maintenance on it are trained and

instructed technical staff working for the operator and manufacturer.

The operator must instruct staff at least once a year on

all safety standards that apply to the machine,

operation,

accredited technical guidelines. The operator must also

check staff's understanding,

document training/instruction,

require staff to confirm participation in training/instruction by means of a signature,

check whether the staff are aware of safety and of dangers in the workplace and whether they

observe the operating manual.

The user must

have read and understood the operating manual,

be familiar with all safety devices and regulations,

be able to manipulate the machine.

For work on electrical components or equipment there are additional requirements:

This work must only be carried out by a qualified electrician or person working under the instructions

and supervision of a qualified electrician.

Before carrying out work on electric components or operating units the following measures must be

taken, in the order given.

Disconnect all poles

Ensure that the machine cannot be turned on again

Check that there is no voltage

The user must stand in front of the machine.

Use the lathe only with properly functioning safety devices.

Table of Contents