Quick Start; Turn On; Select A Search Mode; Noise Cancel - Minelab MANTICORE Instruction Manual

Quick Start

Before first use, it is recommended that you fully charge the battery�
This may take 7 to 8 hours
1

TURN ON

Press the Power button on the side of the Control Pod�

SELECT A SEARCH MODE

2
Select a Search Mode that suits your detecting location
and intended target type�
Navigate to Search Mode:
then press
3

NOISE CANCEL

Navigate to Noise Cancel:
then press the Right Soft Key (
4
GO DETECTING
Press ( Back) to return to the Detect Screen,
and begin detecting�
If there is excessive ground noise after completing the Quick Start steps, perform a Ground Balance
If excessive noise is still being experienced, try reducing the Sensitivity Level a little
For more information on how to manage noise, see
CONTENTS
(page 13)�
Settings >
/ to select a Search Mode�
Settings >
Auto Noise Cancel)�
"Solving Noise" on page
Search Mode,
Noise Cancel,
(page
66�
7
(page 55)�
21)�