Minelab MANTICORE Instruction Manual page 18

Beach
Perfect for all salty conditions
— dry sand, wet sand, surf
and underwater.
Beach Modes are for salt‑water beaches
including dry sand, wet sand, surf and
underwater conditions� Beach modes are
designed to minimise the noise generated
by the presence of conductive salt water
for a smooth, quiet detecting experience
in these conditions� Multi‑IQ+ is better
able to reduce this noise than any single‑
frequency can� Therefore Multi‑IQ+ is the
only Frequency option�
Beach Modes specifically identify any
residual salt response and assign a
Target ID of 0 (zero), and a low tone similar
to that given to ferrous targets so that it is
easily distinguished from desirable targets,
and can be discriminated out�
CONTENTS
General
Salt water beach general‑purpose detecting� Excellent all round
performance for most targets in dry sand or wet sand�
Target Separation Trash Rejection
 
Low Conductors
Salt water beach detecting for small or thin metal objects such
as fine jewellery items in dry or wet sand�
Target Separation Trash Rejection
 
Deep
Salt water beach detecting for small or thin metal objects such
as fine jewellery, with aggressive settings for maximum depth�
Suitable for dry and wet sand�
Target Separation Trash Rejection
 
Surf & Seawater
Salt water Beach detecting, suitable for difficult salt water
conditions, including in the surf zone and salt wash�
Target Separation Trash Rejection
 
18