Goldfield - Minelab MANTICORE Instruction Manual

Goldfield

Ideal for gold nugget
prospecting in mineralised
goldfield locations.
Goldfield General Mode is for gold
prospecting� Generally, gold nuggets are
found in remote goldfields where the
ground is often mineralised and targets are
more sparsely distributed�
For Goldfield General Mode, the default
Audio Theme is set to Prospecting
(page 41), providing a 'true' threshold
tone which maximises sensitivity to
weak target signals� When a target is
detected, the signal volume and pitch vary
proportionally to the strength of the
target signal�
Most goldfield locations have a variable
level of iron mineralisation that requires
constant Ground Balance adjustment,
therefore Tracking Ground Balance is the
default setting�
Goldfield Mode is suited to finding smaller
surface gold nuggets (and some larger
deeper ones) in mineralised ground�
CONTENTS
General
Goldfield detecting, suitable for small nuggets in benign to
moderate soil mineralisation conditions�
Target Separation Trash Rejection
 
19