SICK microScan3 PROFINET Technical Information page 9

8026545/2021-03-15 | SICK
Subject to change without notice
9. To add a new module, double-click on the desired module in the Catalog. Alterna‐
tively, use drag and drop to drag the desired module into Device overview.
10. Click on the module (e.g., mS3 6Byte In/Out...)
11. Properties > General > PROFIsafe
12. Enter the F_Dest_Add and, if applicable, F_iPar_CRC F_WD_Time. The entered values
must match the values configured in Safety Designer.
13. If applicable, enter the f_WD_Time.
see "Overview of the PROFIsafe parameters", page 11
INTEGRATION
T E C H N I C A L I N F O R M A T I O N | microScan3 - PROFINET
2
9