Charging The Scanner In The Cradle; Powering Up The Scanner - Symbol P470 Quick Reference Manual

Quick Reference Guide
Introduction
The Phaser P370/P470 Keyless Radio Frequency (RF) scanners bring new
flexibility and economy to data capture and data management in both industrial
and retail operations. The scanners communicate with the host computer through
radio transmission instead of through a cable. The RF scanner can scan and
transmit without a physical cable from as far away as 100 feet (30.5 meters)
without a direct line of sight. This allows the scanner to be taken where the work
is, whether on the loading dock, the plant floor, the warehouse, or the POS
checkout area. There are several versions available:
P370: cordless industrial scanner.
-
P370 ALR: cordless industrial long range scanner.
-
P470: cordless retail scanner.
-
This Quick Reference Guide provides basic instruction on the set up and use of
the Phaser P370/P470 Keyless RF scanners.
For detailed information on the P370/P470 scanners, refer to the P370/P470
Keyless RF Scanners Product Reference Guide, p/n 72-61496-xx, available at
www.symbol.com/manuals. Refer to PL370/470 RF Cradle Quick Reference
Guide, p/n 72-38494-xx, for information on setting up the PL370/470 RF cradle.

Charging the Scanner in the Cradle

Charge Status
Indicator Light

Powering Up the Scanner

To turn the scanner on pull the trigger. The scanner is brought out of sleep mode
and into scanning mode.
Scanning
To charge the scanner, insert the scanner into
the cradle so the nose of the scanner and tip of
the handle seat into the receptacles.
The battery charges automatically. A full charge
of a depleted battery takes approximately 3-1/2
hours. The charge status indicator light on the
back of the cradle blinks then becomes solid
when the battery is fully charged.
3