Maintenance
Wiper blades
Replacing front wiper blade
ONQ5061018L
Operation
1. Turn off the vehicle.
2. Move the wiper switch to the single
wiping (MIST/1x) position.
3. Hold the wiper switch for more than 2
seconds.
4. Type A (if equipped)
僅 Raise the wiper arm.
僅 Lift the wiper blade clip up. Pull
down the blade assembly and
remove it.
ONQ5041198R_2
僅 Install the new blade assembly.
ONQ5041199R
5. Type B (if equipped)
僅 Raise the wiper arm and turn the
wiper blade assembly to expose the
plastic locking clip.
ONQ5061101R
僅 Compress the clip and slide the
blade assembly downward.
ONQ5061100R
僅 Lift it off the arm.
僅 Install the blade assembly in the
reverse order of removal.
6. Return the wiper arm on the wind-
screen.
7. Turn the vehicle on and wiper arms
will return to the normal operating
position.
Replacing rear wiper blade
ONQ5051096L
Operation
1. Turn off the vehicle.
2. Move the wiper switch to the single
wiping (MIST) position.
3. Hold the wiper switch for more than 2
seconds.
4. Raise the wiper arm and pull out the
wiper blade assembly.
Wiper blades
9
9
45