僅 Operating High Beam - Kia Sportage 2024 Owner's Manual

Features of your vehicle
NOTICE
The ignition switch or ENGINE START/
STOP button must be in the ON position
to turn on the headlamps.
Auto light
ONQ5031460N_2
When the light switch is in the AUTO
light position, the taillamps and head -
lamps will turn ON or OFF automatically
depending on the amount of light out -
side the vehicle.
CAUTION
僅 Never place anything over the sensor
(1) located on the instrument panel as
this will ensure better auto-light sys -
tem control.
僅 Don't clean the sensor using a window
cleaner, the cleaner may leave a light
film which could interfere with sensor
operation.
僅 If your vehicle has window tint or
other types of metallic coating on the
front windshield, the Auto light system
may not work properly.
Operating high beam
ONQ5031461N
To turn on the high beam headlamp:
僅 Push the lever away from you.
The lever will return to its original
position.
The high beam indicator will light
when the headlamp high beams are
switched on.
WARNING
High beams
Do not use high beam when there are
other vehicles in front of or approaching
your vehicle. Using high beam could
obstruct the other driver's vision.
To flash the headlamps:
僅 Pull the lever towards you.
ONQ5031462N
It will return to the normal (low beam)
position when released. The head -
lamp switch does not need to be on to
use this flashing feature.
Lighting
4
4 95