Wi-Fi Connectivity - TESTO Next-Gen 300 Instruction Manual

8 Using the product

The available languages for the selected country version are
displayed.
2
Language
Select
The instrument is reconfigured to the selected language.

1
Back to the main menu: tap
Wi-Fi
8.2.6.2
A radio link, such as a Wi-Fi, is not relevant for carrying out
measurements.
Set up a connection to a Wi-Fi router or a Wi-Fi hotspot. The connection
enables the sending of measurement reports on site by e-mail.
1
Call up function:
2
Tap Wi-Fiselection field.
3 Enable Wi-Fi: tap

Instrument switches to On. The point changes to green.

Display of all available Wi-Fi routers or Wi-Fi hotspots in the vicinity.
4
Select Wi-FiN router or Wi-Fi hotspot.
5
Tap Connect.
6
It may be necessary to enter the password for the selected Wi-Fi.

Connection is set up and shown by Connected.
Further entries via
Category
Add network
Saved networks
42
and tap .
and
| Device Settings
Off button or move grey point to the right.
button
Description
Enter network name using the keypad,
set security standard and if necessary enter
further options. Save entry.
Display of saved networks.
.
| Wi-Fi.