Table of Contents
Advertisement
2
SAFETY
The FLAMEBLAZER has been designed and constructed in such a manner that it can
be used safely. This applies to the use, the circumstances and the regulations as
described in this documentation. Reading this documentation and following the
instructions are therefore necessary for everyone who is authorised to work with the
FLAMEBLAZER.
The FLAMEBLAZER must be used in surroundings that:
•
Have a reasonably stable temperature of between -10 and 50 °C;
•
Have a relative humidity degree between 20 % and 90 % (non condensing);
•
Are free of dust, corrosive gases and high concentrations of organic vapours.
2.1
GENERAL SAFETY RULES
•
Only authorised persons may work with the FLAMEBLAZER;
•
Do not use the FLAMEBLAZER if there are people or animals in the direct
output;
•
Make sure that children, unauthorised people and animals do not obtain
access to the FLAMEBLAZER;
•
Do not use consumable fuel outside of the design intent as may lead to
damage to the hardware, or hazardous situation to property and people;
•
Do not use incorrect nozzles as may lead to damage to property or injury to
people. (Product supplied with L nozzle);
•
Do not connect more units to a single electrical circuit than the installed fuse
is able to handle. (Calculate the summed load with the electrical data from
Chapter 1);
•
Do not remove or bypass any safeguards and safety symbols.
•
All required safety devices must be in good condition and function properly;
•
Ensure sufficient lighting of the surroundings;
•
Keep the workplace clean.
2.2
RIGGING
Please follow the European and national guidelines for safe rigging and trussing.
2.3
NOISE LEVELS
The measured maximum noise levels of the product is 79 dB(A) at 3 m distance
away. Please follow the European and national guidelines regarding hearing
protection.
MAGICFX FLAMEBLAZER
— User and Installation Manual
®
15
Advertisement
Table of Contents
