CAUTION
3.3
(RE)FILL THE FUEL
WARNING
WARNING
CAUTION
1
Disconnect the machine from the power supply.
2
Open the enclosure access lid.
Cross-threading the nozzle into the bulkhead, under tightening or
not using a ring seal will cause a poor seal resulting in fuel leaks
in the burn chamber.
Always make sure that the machine is disarmed and not enabled
(FX LED indicator on the machine is dimmed) when you
approach a machine.
Eye contact with fuel under pressure and burning fuel from the
machine can lead to serious eye injury. Always wear eye
protection when you come near a powered machine.
The flame output burn chamber and enclosure heats up during
operation and could cause burns when touched. Do not touch
any metal parts of a (recently) triggered machine.
MAGICFX FLAMEBLAZER
— User and Installation Manual
®
23