Magicfx FLAMEBLAZER User And Installation Manual page 21

2
To remove the nozzle from the burn chamber place the FLAMEBLAZER Nozzle
exchange tool over the hex head of the nozzle being careful not to touch or miss-
align the ignition probes.
NOTICE
3
With the FLAMEBLAZER Nozzle exchange tool held in a vertical position,
continuous anti-clockwise rotation will result in the nozzle becoming free from the
bulkhead.
This can be lifted out of the burn chamber and the nozzle exchange tool should
retain the nozzle with the internal sprung clip.
WARNING
CAUTION
The machine should be on level ground and the burn chamber
clean of foreign objects and materials.
Eye contact with fuel under pressure from the machine can lead
to serious eye injury. Always wear eye protection when you
change the nozzle.
Nozzle removal will result in the exposure of residual flammable
fuel in the resulting orifice. Caution should be exercised to make
sure this cannot be ignited.
MAGICFX FLAMEBLAZER
— User and Installation Manual
®
21