Spark Safely; General Safety Rules; Rigging; Noise Level - Magicfx SPARXTAR SPARK FX User And Installation Manual

2

SPARK SAFELY!

The MAGICFX SPARXTAR has been designed and constructed in such a manner that
®
it can be used safely. This applies to the use, the circumstances and the regulations
as described in this documentation. Reading this documentation and following the
instructions are therefore necessary for everyone who is authorised to work with the
MAGICFX SPARXTAR.
®
The MAGICFX SPARXTAR must be used in surroundings that preferably:
®
• Have a reasonably stable temperature of between -10 and 50°C.
• Have a relative humidity degree between 20% and 90% (non condensing).
• Are reasonably free of dust, corrosive gases and high concentrations of
organic vapours.
• Are not situated in the vicinity of a source of vibration.
2.1

GENERAL SAFETY RULES

• Only authorised persons may work with the MAGICFX
• Do not use the MAGICFX
output.
• Make sure that children, unauthorised people and animals do not obtain
access to the MAGICFX
• Do not connect more units to a single electrical circuit than the installed fuse
is able to handle. (Calculate the summed load with the electrical data from
Chapter 1)
• Do not remove any safeguards, safety caps and safety symbols.
• All required safety devices must be in good condition and function properly.
• Ensure sufficient lighting of the surroundings.
• Keep the workplace clean.
2.2

RIGGING

Please follow the European and national guidelines for safe rigging and trussing.
2.3

NOISE LEVEL

The measured maximum noise levels of the product are 72 dB(A) at 1 m and 65
dB(A) at 5 m distance away. Please follow the European and national guidelines
regarding hearing protection.
SPARXTAR if there are people or animals in the direct
®
SPARXTAR.
®
MAGICFX® SPARXTAR — User and Installation Manual
SPARXTAR.
®
11