Magicfx FLAMEBLAZER User And Installation Manual page 18

WARNING
CAUTION
CAUTION
CAUTION
CAUTION
NOTICE
18 MAGICFX FLAMEBLAZER
Missing or obscured safety symbols on the machine can lead to
death or serious injury. Make sure all safety symbols are correctly
in place, see section 2.3.
The flame output burn chamber and enclosure heats up during
operation and can cause burns when touched. Do not touch
any metal parts of a (recently) triggered machine.
Any material that blocks the output nozzle can result in injuries,
fire and damage to the machine when the machine is used.
Always inspect the nozzle before operating and remove any
obstructing material.
Only open the enclosure access lid when the machine is not
powered.
The FLAMEBLAZER should not be used in winds exceeding 20 m/h
or 32 km/h.
Always keep the machine dry and do not let excessive amounts
of liquids such as rain or snow wet the machine.
— User and Installation Manual
®