Safety; Introduction; General Safety Rules - Magicfx SHOT BASE DMX Manual

6. SAFETY

6.1

INTRODUCTION

®
The MAGICFX Shot Base DMX is a device for electronically shooting electric cannons from a
distance. These electric cannons have been pre-filled with confetti or streamers and are available in
two sizes, 40cm and 80cm. The length of the electric cannons not only determines the content but
also the output of the contents to be expelled.
The Shot Base DMX must be placed and used in surroundings that preferably:
- Have a reasonably stable temperature of between 0 and 30ºC.
- Have a relative humidity degree of no more than 75%.
- Are reasonably free of dust, corrosive gases and high concentrations of organic vapours.
The Shot Base DMX has been designed and constructed in such a manner that it can be used safely.
This applies to the use, the circumstances and the regulations as described in this documentation.
Reading this documentation and following the instructions are therefore necessary for everyone who is
authorised to work with the Shot Base DMX.
6.2

GENERAL SAFETY RULES

- Only use the Shot Base DMX if there are no people, animals or other objects in the direction of the
electric cannon within the output distance. The shooting direction is the direction in which the
electric cannon in the Shot Base DMX is pointed. The output distance depends on the content and
length of the electric cannons.
- Make sure that children, unauthorised people and animals do not obtain access to the Shot Base
DMX!
- Do not take hold of the Shot Base DMX while it is working or is switched on. Also, when the Shot
Base DMX is not working, the electric cannon may still be filled.
- Safety devices may not be removed or disabled.
- All required safety devices must be in good condition and function properly.
- Ensure sufficient lighting of the surroundings.
- Keep the workplace clean.
- Only authorised persons may carry out work with the Shot Base DMX.
Version 1.0
Page 8