1995. All our products are made under the brand name MAGICFX® which by now has acquired a great reputation on account of its quality and reliability. All products are made in accordance with the European Machinery Directive. MAGIC FX manages the entire production process in-house, from the design stages and prototyping to production.
Version 1.0 2. CE MARKING PLEASE NOTE: We presume that you, your employees and others who use or come into contact with the machine are familiar with how the machine must be dealt with. This includes the correct use, maintenance and repair of the machine as described in this user manual.
User documentation MAGICFX® Shot Base Wireless 3. DECLARATION OF CONFORMITY DECLARATION OF CONFORMITY (according to Annex II.1.A of the Machinery Directive) Concerning the Machinery Directive. We; MAGIC FX B.V. Schouwrooij 27 5281 RE Boxtel The Netherlands State under personal responsibility: We are the manufacturer of the product: ®...
Version 1.0 4. FOREWORD This manual describes the MAGICFX® Shot Base Wireless. The information in this manual is important for the proper and safe functioning of the Shot Base Wireless. If you are not familiar with the installation, operation, preventative maintenance etc. of the Shot Base Wireless then please read this user manual carefully from beginning to end.
User documentation MAGICFX® Shot Base Wireless CONTENTS CONGRATULATIONS! ..................1 CE MARKING ....................2 DECLARATION OF CONFORMITY ..............3 FOREWORD ....................4 INTRODUCTION ....................6 DESCRIPTION AND APPLICATION OF THE SHOT BASE WIRELESS ......6 NECESSARY ACCESSORIES ....................6 CANNONS ..........................6 SAFETY ......................
Version 1.0 5. INTRODUCTION DESCRIPTION AND APPLICATION OF THE SHOT BASE WIRELESS The Shot Base Wireless is a confetti shooting system which has been specially developed to easily shoot electric cannons from a podium or truss. The Shot Base Wireless can be used with electric confetti cannons as well as with electric streamer cannons.
Page 8
User documentation MAGICFX® Shot Base Wireless The following types of electric cannons are possible: CONTENT TYPE CANNON CANNON LENGTH OUTPUT CONFETTI (150g) 40CM STREAMERS (150g) 40CM CONFETTI (300g) 80CM STREAMERS (300g) 80CM Table 5.3 All pre-filled cannons are for one-off use only.
Version 1.0 6. SAFETY INTRODUCTION The Shot Base Wireless has been designed and constructed in such a manner that it can be used safely. This applies to the use, the circumstances and the regulations as described in this documentation. Reading this documentation and following the instructions are therefore necessary for everyone who is authorised to work with the Shot Base Wireless.
User documentation MAGICFX® Shot Base Wireless Sign and explanation Photo PIC 616 Follow the instructions The operator must be told that he/she may only operate the Shot Base Wireless after reading the user manual. A warning is given for this by means of the command sign of PIC 616.
User documentation MAGICFX® Shot Base Wireless 8. ACCESSORIES MFX0302 – Cannon clamp MFX3103 – Twenty clamp M10 MFX0308 – Power cable MFX3206 – Remote 4 MFX3207 – Remote 8 MFX3208 – Battery for remote Table 8.1 You can order these parts and accessories from: MAGIC FX B.V.
Version 1.0 9. PREPARATIONS Unpack the Shot Base Wireless. Dispose of the packaging material without harming the environment. Inspect the machine for any damage. If damage is noticed this must be reported to MAGIC FX. If u want to use the Shot Base Wireless on a location without an constant power supply u need to charge the Shot Base Wireless first.
The machine can be damaged if you do not follow the procedures carefully. DANGER WARNING: The MAGICFX® Shot Base Wireless may only be installed by adults and authorised persons. Prepare the Shot Base Wireless for use as follows: Flip the powerswitch to turn on the Shot Base Wireless.
Page 15
Version 1.0 Press the button on the remote u want to assign to output 1. The LEARN LED on the Shot Base Wireless will light up. Press the same button on the remote again to confirm your setting. The LEARN LED will blink to confirm your setting.
Page 16
User documentation MAGICFX® Shot Base Wireless If u want to use the Shot Base Wireless mounted in a truss system: mount 2 trussclamps (MFX3104) to the bottom of the Shot Base Wireless. Next place the Shot Base Wireless in the truss system and secure the trussclamps.
The machine can be damaged, if you do not follow these procedures carefully. DANGER WARNING: The MAGICFX® Shot Base Wireless may only be installed by adults and authorised persons. The Shot Base Wireless may only be operated if all parts are completely and correctly installed/connected.
Page 18
User documentation MAGICFX® Shot Base Wireless Now press the preprogrammed buttons on the remote to activate the cannons. Allways look before shooting if there is no one in front of the output direction of the cannons. The maximum distance between remote an...
Version 1.0 12. SWITCHING OFF To switch off the Shot Base Wireless, take the following steps: Shut off all remote’s Turn off the Shot Base Wireless. If it is still connected unplug the powerCON connector Remove all cannon’s from the Shot Base Wireless.
Page 20
User documentation MAGICFX® Shot Base Wireless The Shot Base Wireless is now turned off Allways charge the battery again before storing it, this way the battery stays in optimum condition. Page 19...
Version 1.0 13. TROUBLESHOOTING The Shot Base Wireless doesn’t react to a remote 4/8. This problem has multiple causes: first check if the remote is switched on (the red LED is lit and the switch is away from the antenna) Press on one of the buttons of the remote 4/8 to send an signal to the Shot Base Wireless, if the LEARN LED on the Shot Base Wireless blinks fast the signal is received by the Shot Base Wireless in this case the Shot Base Wireless needs to be programmed to the remote.How to do this view page 10 of this manual.