Safety; Introduction; General Safety Rules; Warnings - Magicfx Power Drop User Manual

User Documentation MAGICFX® Power Drop

6. SAFETY

6.1

INTRODUCTION

The Power Drop should be located and used in an environment that preferably:
Has a fairly constant temperature between 0 and 30ºC.
-
Has a relative humidity not exceeding a maximum of 75%.
-
Is reasonably free of dust, corrosive gases, and high concentrations of organic vapors.
-
- Does not contain any source of vibrations in the environment.
The Power Drop is designed and constructed so that it can be used in a safe manner. Specifically, this
refers to the usage, situations, and prescriptions for the device as described in this documentation. It
is the responsibility of all persons authorized to use the Power Drop to read and follow the instructions
in this manual.
6.2

GENERAL SAFETY RULES

Ensure that the Power Drop is not accessible to children, unauthorized persons, or animals!
-
Do not touch the Power Drop when it is operational or turned on. Even if the device is not in
-
operation it might be ready to activate.
Safety devices must not be removed or rendered inoperative.
-
All required safety devices should be in good working order and functioning properly.
-
Ensure that there is adequate lighting in the environment.
-
Keep the workplace clean.
-
Only authorized persons may work with the Power Drop.
-
6.3

WARNINGS

There are several warnings displayed on the Power Drop to which the following restrictions apply:
- The text must not be removed or otherwise spoilt. The operator should regularly check that the
warnings are in good condition.
The operator must ensure that the text is always visible and legible and that it remains so.
-
Page 7
DANGER WARNING:
Any missing, damaged, or illegible text or icons must be replaced.