Appendix B System Specifications - Supermicro SuperServer SYS-110C-FHN4T User Manual

Processors
Single socket 10th Generation Intel® Core™ i9 ~ i3 Processor, Intel® Xeon® W-1200 Processors in LGA-1200; Supports CPU
TDP up to 35-80W.
Note: Refer to the motherboard specifications pages on our website for updates to supported processors.
Chipset
Intel® W480E
BIOS
AMI 256Mb SPI Flash EEPROM
Memory
Four DIMM slots, up to 128GB unbuffered ECC/non-ECC UDIMM, ECC DDR4 UDIMM with speeds up to 2933MHz
Storage Drives
Two 2.5" hot-swap SATA drive bays
One M.2 NVMe or Two M.2 SATA3 (M-Key/E-Key, 2280/22110/2230)
PCI Expansion Slots
One PCIe 3.0 x16 slot HHHL
Input/Output
One RJ45 dedicated IPMI LAN port
Two RJ45 10GBase-T LAN ports
Two RJ45 GbE LAN ports
Four USB 3.0 ports (4 rear)
One VGA port (1 rear)
One DVI-D port
Two display ports with dual-mode
Two SATA3 (6Gbps); RAID 0/1 support
One SuperDOM (Disk on Module) port
Motherboard
X12SCZ-TLN4F; Length 9.6", Width 9.6" (244mm x 244mm)
Chassis
CSE-510FT-203B 1U Rackmount, 1.7 x 17.2 x 11.3in. / 43 x 437 x 287mm (HxWxD)
System Cooling
Four 4cm PWM heavy duty fans with optimal fan speed control
One air shroud
Power Supply
Model: (default) PWS-203-1H 200W module, 80Plus Gold level;
AC Input
200W: 100-240Vac / 2.6A Max / 50-60 Hz
+12V
Max: 16A (100Vac-240Vac) / Min: 0A
Appendix B
System Specifications
107
Appendix B: System Specifications