Storage Drives; Installing Drives - Supermicro SuperServer SYS-110C-FHN4T User Manual

3.7 Storage Drives

The storage drives are mounted in tool-less drive carriers that simplify their removal from the
chassis. These carriers also help promote proper airflow. For compatible storage drives, see
the SYS-110C-FHN4T

Installing Drives

1
0
Installing Fixed 2.5" Hard Drives
The 2.5" hard drives must be installed in brackets before they are screwed into the chassis.
Begin by removing power from the system as described in section 3.1 and remove the chassis
cover.
1. Insert up to two 2.5" hard drives into the hard drive bracket.
2. Secure the 2.5" hard drives to the bracket with the screws provided.
3. Place the hard drive bracket in the chassis as illustrated in Figure 3-2.
4. Secure the hard drive bracket to the floor of the chassis using the four screws provided.
5. Connect the power and data cables to the motherboard.
Figure 3-6. Installing 2.5" Drives in the Chassis
Note: Figure is for illustrative purposes only. Only one bracket for two drives can be installed
to the 110C-FHN4T.
Chapter 3: Maintenance and Component Installation
product page.
Figure 3-5. Logical Drive Numbers
36