Table of Contents
Advertisement
Step 1: Plug a RJ45 Ethernet cable into the network port of the GSC3516.
Step 2: Plug the other end into the power over Ethernet (PoE) switch or PoE injector.
Connecting Wiring Seat
GSC3516 support to connect a "Key & LED" or "Normal Key" to the 2-pin port via Wiring Seat using following steps:
Step 1: Take the wiring seat from the install kits.
Step 2: Connect the "Key & LED" or "Normal Key" with the wiring seat (as shown in the figure below)
Note: This port supports the parallel connection of an incandescent lamp (with less than 1W) or an LED lamp (with less than
100mA).
Access GSC3516 Web GUI
The GSC3516 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow users to
configure the application phone through a Web browser such as Microsoft's IE, Mozilla Firefox, Google Chrome and etc.
Figure 6: Powering GSC3516
Figure 7: Connecting Wiring Seat
Advertisement
Table of Contents
