Network Settings Page Definitions; Ethernet Settings - Grandstream Networks GSC35 Series User Manual

Hide thumbs Also See for GSC35 Series:
Table of Contents

Advertisement

Channel
Group Paging
Priority Group
Emergency Group
Accept While Busy
Group

Network Settings Page Definitions

Ethernet Settings

If IPv4 is selected, the device will be using IPv4 addressing, otherwise, it will be using IPv6 addressing.
Internet
Protocol
Default is Prefer IPv4.
Different
Configures whether to set up different networks for the phone data and the call. If set to "Yes", you need to
Networks
configure the data network and VoIP network respectively.
for Data
and VoIP
Note: Reboot is required to take effect.
Calls
IPv4
PTT while in active call. If set to "Yes", while in active PTT talk, device will accept PTT if it has the
same priority; If device is in active SIP call, device will accept PTT and put the SIP call on hold.
Default is "Disabled"
Configures PTT channel. Configures options for the channel such as transport, accept, join PTT and
its label. Only available and joined channel will be displayed in PTT channel list. If users need send
or receive PTT, "Transport" and "Accept" must be enabled for this channel.
Paging Config
Allows to enable or disable group paging.
Configures priority paging group. Paging received on priority group will take precedence overactive
paging on normal group.
Set emergency group for paging. Emergency group has the highest priority. Paging using emergency
group will take precedence over paging on priority or normal group.
Configures whether to accept paging while device is in active call. If set to "No", device will ignore
paging while in active call. If set to "Yes", while in active paging call, the device will accept other
paging calls if it has the same priority. If device is in an active SIP call, device will accept paging and
hang up the SIP call.
Configures paging group. Users can configure whether to use the group to accept and join group, and
its label. Only available and joined group will be displayed in paging group list. If users need receive
paging, "Subscribe" must be enabled for this group.
Table 21: Multicast/Group Paging

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gsc3516

Table of Contents