Table of Contents
Advertisement
1. Locate the equipment holder on the desired position with arrow up. Drill three holes on the wall referring to the positions
of holes on the metal bracket.
2. Fix the metal bracket on the wall by expansion screws.
3. Align the position line on device's back cover with the positioning slot.
4. Rotate the device clockwise until it is locked on the right position.
Ceiling Mount
1. Put the ceiling mounting (metal bracket) in the ceiling's center and mark the position of the three screws holes.
2. Drill a round hole with a diameter of 18mm for Ethernet cable. The distance between its center and the highlighted hole
on the plastic bracket should be 35mm.
3. Fix the plastic and metal brackets on the ceiling with flat-head screws and locknuts. Then place and Ethernet cable pass
through the 18mm-round hole.
4. Align the position line on device's back cover with the positioning slot.
5. Rotate the device clockwise until it is locked on the right position.
Anti-theft Installation
After the device is assembled with the metal bracket support on the wall or ceiling, use the anti-detachable screw (M3 x 50) in
order to prevent theft.
Powering and Connecting GSC3516
The GSC3516 can be powered on using PoE/PoE+ switch or PoE injector using following steps:
Figure 3: Wall Mount
Figure 4:Ceiling Mount
Figure 5: Anti-theft Installation
Advertisement
Table of Contents
