Table of Contents
Advertisement
Allow DHCP Option 242
(Avaya IP Phones)
Config Provision
Download and Process All
Available Config Files
3CX Auto Provision
Upgrade and Provisioning/Advanced Settings
Send HTTP Basic Authentication By Default
Enable SIP NOTIFY Authentication
Validate Hostname in Certificate
Allow AutoConfig Service Access
Factory Reset
System Diagnosis
Syslog Protocol
Syslog Server
Syslog Level
The default setting is "Option 150"
Enables DHCP Option 242. Once enabled, the device will use the configuration info issued by the local
DHCP in Option 242 to configure proxy, transport protocol and server path. The default setting is
"Disabled".
Config Provision
Device will download the configuration files and provision by the configured order. Use arrow buttons to
add and order configuration files.
By default, the device will provision the first available config in the order of cfgMAC, cfgMAC.xml,
cfgMODEL.xml, and cfg.xml (corresponding to device specific, model specific, and global configs). If set
to "Yes", the device will download and apply (override) all available configs in the order of cfgMAC,
cfg.xml, cfgMODEL.xml, cfgMAC.xml.
If enabled, the phone will send SUBSCRIBE requests to the multicast address in LAN during bootup for
automatic provisioning. This feature requires 3CX server support. Default setting is "Enabled".
Table 34: Upgrade and Provisioning – Provision page
Determine whether to send basic HTTP authentication information to the server by
default when using wget to download firmware or config file. If set to "Yes", send
HTTP/HTTPS user name and password no matter the server needs authentication or
not. If set to "No", only send HTTP/HTTPS user name and password when the server
needs authentication. The default value is "Disabled".
Device will challenge NOTIFY with 401 when set to "Yes". The default value is
"Enabled".
Configures to validate the hostname in the SSL certificate. The default value is
"Disabled".
Set to allow access to the AutoConfig service. If not checked, access to
service.ipvideotalk.com will be disabled. The default value is "Enabled".
Resets the device to the default factory setting mode by clicking on "Start button".
Table 35: Upgrade and Provisioning – Advanced Settings page
Syslog
Select the transport protocol over which log messages will be carried.
● UDP: Syslog messages will be sent over UDP.
● SSL/TLS: Syslog messages will be sent securely over TLS connection.
The URL/IP address for the syslog server.
Selects the level of logging for syslog. There are 4 levels from the dropdown list: DEBUG,
INFO, WARNING and ERROR. The following information will be included in the syslog
Advertisement
Table of Contents
