2. The dynamic variables need to have a "$" at the beginning. For example: local=$local
3. If users need to add multiple dynamic variables in the same event, users could use "&" to connect with different dynamic
variables. For example: 192.168.40.207/mac=$mac&local=$local
4. When the corresponding event occurs on the device, the device will send the MAC address and phone number to server
address 192.168.40.207.
Bootup Completed
Configures the event URL when phone boots up.
Registered
Configures the event URL when an account in the device is registered successfully.
Unregistered
Configures the event URL when an account in the device is unregistered.
Incoming Call
Configures the event URL when phone has an incoming call.
Outgoing Call
Configures the event URL when phone has an outgoing call.
Missed Call
Configures the event URL when the device has new a missed call.
Established Call
Configures the event URL when a call is established.
Terminated Call
Configures the Action URL to send when phone terminates a call.
Log On
Configures the event URL when users log on the device successfully.
Log Off
Configures the event URL when users log off the device.
Application Page Definitions
Music
Audio File
Local Music
Audio File
Phone Status
Call Operation
Table 37: Event Notification
Please select the audio file type:
● RTSP stream: Set up the stream's RTSP address. it supports playing audio files in .ts (.mp3) format. For
example: rtsp://ip_address/musicFile.ts.
● Local Music: or choose locally from your computer
Please select local music, supporting MP3 and OGG formats.
Timed playback
Click on "Add rule" to create Timed playback rule
Timed playback rule
Please select the audio file type
Playback