Table of Contents
Advertisement
Syslog Keyword Filter
Send SIP Log
With RTP Packets
With Secret Key Information
Enter the URL into the textbox then click "Start" to begin the ping, Results will be shown below.
Enter the URL into the textbox then click "Start" to begin the Traceroute, Results will be shown below.
When enabled, this device will allow remote access and remote collection of logs. It will automatically end when it expires.
Note: Click on "Start", then the Access Address and Expiration Time will be shown below.
Record
Recording List
View Recording
Event Notification
Set the URL for events on phone web GUI, and when the corresponding event occurs on the device, the device will send the
configured URL to SIP server. The dynamic variables in the URL will be replaced by the actual values of the device before
sending to SIP server, in order to achieve the purpose of events notification. Here are the standards:
1. The IP address of the SIP server needs to be added at the beginning and separate the dynamic variables with a "/".
packet:
● DEBUG: Sent or received SIP messages.
● INFO: Product model/version on boot up, NAT related info, SIP message summary, Inbound
and outbound calls, Registration status change, negotiated codec, Ethernet link up
● WARNING: SLIC chip exception.
● ERROR: SLIC chip exception, Memory exception.
Note: Changing syslog level does not require a reboot to take effect.
The default setting is "None".
Only send the syslog with keyword, multiple keywords are separated by comma. Example: set
the filter keyword to "SIP" to filter SIP log.
Configures whether the SIP log will be included in the syslog messages. Default is "Disabled"
Packet Capture
Configures whether the packet capture file contains RTP or not. Then click "Start" to start Packet
Capture or "Stop" to stop the Packet Capture.
Configures whether the packet capture file contains secret key information or not. Then click
"Start" to start Packet Capture or "Stop" to stop the Packet Capture.
Ping
Traceroute
Remote Diagnostics
Record
Click "Start" to capture audio data and "Stop" to end. The audio record data is used to help
troubleshoot audio issues. Users can record up to 1 minute of audio data.
Choose an audio file and click the "Delete" button on the right to delete this file.
Click on the "List" button to view the audio records. The files are listed in chronological order.
Click the file to download to computer. Note: The audio data file will be saved under
FileManager -> Internal Storage -> Recfiles folder. The record files can also be deleted from this
folder.
Table 36: System Diagnostics page
Advertisement
Table of Contents
