Network Settings Page Definitions; Ethernet Settings - Grandstream Networks GSC35 Series User Manual

Network Settings Page Definitions

Ethernet Settings

Preferred Internet
Protocol
Different Networks for
Data and VoIP Calls
IPv4
IPv4 Address Type
DHCP VLAN Override
If IPv4 is selected, the device will be using IPv4 addressing, otherwise, it
will be using IPv6 addressing. Default is Prefer IPv4.
Configures whether to set up different networks for the phone data and the
call. If set to "Yes", you need to configure the data network and VoIP
network respectively. Note: Reboot is required to take effect.
Allows users to configure the appropriate network settings on the device.
Users could select "DHCP", "Static IP" or "PPPoE".
•
DHCP: Obtain the IP address via one DHCP server in the LAN. All
domain values about static IP/PPPoE are unavailable (although
some domain values have been saved in the flash.)
•
PPPoE: Configures PPPoE account/password. Obtain the IP
address from the PPPoE server via dialing. (When "Different
Networks for Data and VoIP Calls" is set to Yes; it will be available
for "Network Configuration of Data" only).
•
Static IP: Manually configures IP Address, Subnet Mask, Default
Router's IP Address, DNS Server 1 and DNS Server 2.
By default, it is set to "DHCP".
DHCP Option 132 defines VLAN ID and DHCP Option 133 defines priority
tag ID. GSC3510/GSC3505 supports DHCP VLAN override via DHCP
Option 132 and DHCP Option 133, or encapsulated DHCP option 132 and
DHCP option 133 in DHCP option 43.
•
Users could select "Disable", "DHCP Option 132 and DHCP
Option 133", or "Encapsulated in DHCP Option 43".
•
When set to "DHCP Option 132 and DHCP Option 133", the
GSC3510/GSC3505 will get DHCP Option 132 as VLAN ID and
get DHCP Option 133 as VLAN priority, from the DHCP server
directly.
•
When set to "Encapsulated in DHCP Option 43", the
GSC3510/GSC3505 will get VLAN ID and VLAN priority value
from the DHCP Option 43 which has DHCP Option 132 and DHCP
GSC35XX Series User Manual
Version 1.0.0.15
P a g e | 65