Barazza 1FEVGMC Instruction Manual page 31

Oven installation
For all ovens. After the electrical connection
has been done:
1. Position the oven inside the unit and
ensure that the feed cable is not trapped
or in contact with parts of the oven that
heat up.
2. Make sure that the body of the oven is
not in contact with the walls of the unit
and that there is a minimum space of 2
mm between adjacent units.
3. Centre the oven in the unit so that there is
a minimum space of 5mm between the
oven and the doors of the furniture that
surrounds it.
4. Open the door and insert the plastic plugs
supplied with
respective housings.
5. Fasten the oven to the unit with the
screws supplied, screwing them into the
unit through the stops.
WARNING! Do not lean on the open door
of the oven while executing steps 4 and 5,
as the open is not secured to the unit and
it could move forwards and fall to the
floor.
31
the oven into their
EN