Advertisement
TENSOR - MAIN DESK ASSEMBLY INSTRUCTIONS
3
3
Steps:
1.
Align one frame assembly on 10 pilot holes (spanning the support beam when
present). Install (10) M6x25mm wood screws; do not fully tighten.
2.
Once all screws have been started and leg alignment is confirmed, fully tighten
screws.
3.
Repeat steps 1 and 2 for opposite frame assembly.
To report any issues with this product, please contact our customer service department at (888) 552-5699
M6x25
For more information, visit www.sitonit.net
1
2
No. C6256 Rev. A
Advertisement
Need help?
Do you have a question about the TENSOR and is the answer not in the manual?