Advertisement
TENSOR - RETURN DESK ASSEMBLY INSTRUCTIONS
4
Steps:
1.
Locate the mending plate as near to the center of the return location as
possible. The location may vary based on the table width.
2.
Install mending plate (included in base carton) to the table using (4) screws
provided.
To report any issues with this product, please contact our customer service department at (888) 552-5699
M6x25
Note: Use this mending plate
for returns 36", 42" and 48" long.
For more information, visit www.sitonit.net
No. C6257 Rev. A
Advertisement
Need help?
Do you have a question about the TENSOR and is the answer not in the manual?