SitOnit Seating TENSOR Assembly Instructions Manual page 16

TENSOR - RETURN DESK ASSEMBLY INSTRUCTIONS
6
Steps:
1. Discard the mending plate and associated screws from the base carton and
use the mending kit provided separately.
2. Locate the first mending plate 1" from the edge of the return location as
shown. Locate the second plate as far from the first as possible.
3. Install mending plates to the table using (8) screws provided.
To report any issues with this product, please contact our customer service department at (888) 552-5699
M6x25
Note: Use these mending plates
for returns 54" and 60" long.
For more information, visit www.sitonit.net
No. C6257 Rev. A